Volume 3, Issue 3 (november 2019)
ohhp 2019, 3(3): 238-245 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
KHANALI ZAFRA V, Reza SADEGHI BANIS M. Analysis of Futile Events in Small Industrial and Production Workshops of Isfahan Province by Mort Method. ohhp 2019; 3 (3) :238-245
URL: http://ohhp.ssu.ac.ir/article-1-181-en.html
URL: http://ohhp.ssu.ac.ir/article-1-181-en.html
Department of Environmental Health Safety Management (HSE), Najaf Abad School of Nuclear Engineering, Isfahan, Iran
Abstract: (2012 Views)
Introduction: One of the important and growing organizational considerations is the staff health and safety. Workplace events cause death and disability in a large number of employees annually. So, employers have seriously focused their attention and organizational resources on this important issue. The purpose of this study was to investigate causes of the fatal industrial-production activities using the Morte's technique and to provide management solutions to reduce the incidents caused by the workshop in Yazd province, Iran.
Methods: Initially, a total of 57 fatal accidents were identified and investigated in Isfahan industrial enterprises. Among this number, 12 cases of work-related incidents were studied. In the second stage, events were analyzed by Morte tree. This descriptive, correlational, and applied research was a fieldwork conducted as a library study to collect the required data.
Results: The results showed that most causes of defect accidents were among the management system factors and covered 40.4% of the total causes. This was followed by the human errors and defects in working processes (36.5%), defects in fences and barriers (19.2%) in rescue process, and other causes of accidents (3.9%).
Conclusion: By adopting safety measures in compliance with the protective regulations, extent and severity of the accidents can be reduced to a large extent. Many good practices can also be prevented by appropriate management measures.
Methods: Initially, a total of 57 fatal accidents were identified and investigated in Isfahan industrial enterprises. Among this number, 12 cases of work-related incidents were studied. In the second stage, events were analyzed by Morte tree. This descriptive, correlational, and applied research was a fieldwork conducted as a library study to collect the required data.
Results: The results showed that most causes of defect accidents were among the management system factors and covered 40.4% of the total causes. This was followed by the human errors and defects in working processes (36.5%), defects in fences and barriers (19.2%) in rescue process, and other causes of accidents (3.9%).
Conclusion: By adopting safety measures in compliance with the protective regulations, extent and severity of the accidents can be reduced to a large extent. Many good practices can also be prevented by appropriate management measures.
Type of Study: Research |
Subject:
safty
Received: 2018/12/15 | Accepted: 2019/11/21 | Published: 2019/11/21
Received: 2018/12/15 | Accepted: 2019/11/21 | Published: 2019/11/21
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
