Volume 1, Issue 1 (July 2017)
ohhp 2017, 1(1): 42-51 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Gholi Pour M, Feyzi V, Khammar A.
Identification and Assessment of Dangers' Risk in Production
Hall of Radiator Parts a Metal Industry with JSA Method
. ohhp 2017; 1 (1) :42-51
URL: http://ohhp.ssu.ac.ir/article-1-26-en.html
URL: http://ohhp.ssu.ac.ir/article-1-26-en.html
Department of Occupational Health Engineering, School of Health, Zabol University of Medical Sciences, Zabol, Iran
Abstract: (5533 Views)
Introduction: Analysis of occupational accidents can identify and reduce the working environment risks. This is thus helpful in creating a secure working environment and increasing workers' productivity. Purpose of This study was to identify hazards and assess their risk through the job safety analysis technique in one metal industry of the country.
Methods: In this cross-sectional study, potential risks were identified and activities' risk levels were assessed by Job Safety Analysis. Risk level (RAC) was calculated based on the two parameters of severity and likelihood of risk. Finally, control measures were presented based on risk levels' assessment code and their prioritization.
Results: Based on the results achieved from investigations of saws, disc saws, format substitution, and Geyzak press jobs, a total of 107 risks were identified. After their analysis and risk assessment, 13% of them were in the unacceptable level, 49% were in the medium level, and 38% of the risks were acceptable. The corrective and preventive recommendations were then presented to remove or limit these risks.
Conclusion: Based on the results, it is possible to reduce the risks significantly by providing appropriate tools and personal protective equipment, and implementation of the proposed measures.
Methods: In this cross-sectional study, potential risks were identified and activities' risk levels were assessed by Job Safety Analysis. Risk level (RAC) was calculated based on the two parameters of severity and likelihood of risk. Finally, control measures were presented based on risk levels' assessment code and their prioritization.
Results: Based on the results achieved from investigations of saws, disc saws, format substitution, and Geyzak press jobs, a total of 107 risks were identified. After their analysis and risk assessment, 13% of them were in the unacceptable level, 49% were in the medium level, and 38% of the risks were acceptable. The corrective and preventive recommendations were then presented to remove or limit these risks.
Conclusion: Based on the results, it is possible to reduce the risks significantly by providing appropriate tools and personal protective equipment, and implementation of the proposed measures.
Type of Study: Research |
Subject:
safty
Received: 2017/02/19 | Accepted: 2017/05/16 | Published: 2017/07/30
Received: 2017/02/19 | Accepted: 2017/05/16 | Published: 2017/07/30
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
